The Digital Choice Photography Today Essay Example For Students

The Digital Choice: Photography Today Essay The camera is at the center of our society; video and pictures document our lives and we are consumed by the content they capture à - just look at social networking sites such as flickr and YouTube or news sites such as CNNs I-Report. While the decision used to be whether to purchase a film or digital camera, it is now more about what type of digital camera to buy. Mega pixels have reached (and surpassed) the quality you can get with a film camera, and there are now hundreds of different cameras on the market. The first type of digital camera is the single lens reflex (SLR); the SLR camera is known for producing higher quality prints and gives greater control to the photographer but is larger and more costly. The other type of camera is the à point and shoot which is smaller and less expensive, yet doesnt always deliver quality prints or the ability to control the settings as directly. So, whether youre an everyday Joe or a professional photographer, purchasing a camera can be a daunting task and it is important to understand the two main options à -the SLR or the à point and shoot camera and what each has to offer. We will write a custom essay on The Digital Choice: Photography Today specifically for you for only $16.38 $13.9/page Order now In the SLR digital camera, the viewfinder looks through the lens instead of on the body of the camera. This type of lens allows you to have greater control over the color, brightness and framing because you can define the image yourself. Generally this is the type of camera that serious photographers and artists have because it gives them greater control over quality of the image (Long). A low end digital SLR camera can be purchased for around $500 while the high end models can be more than $4,000. One example of a high end model is the Canon EOS 1D Mark III which boosts 10-megapixel continuous shooting with low noise, highly customizable settings (with weather sealing) and a 3-inch LCD screen and retails anywhere from $4146 to $4510 (cnet.com). There are also additional costs with this type of camera such as different types of lenses that are each sold separately. Also, because of the size of the camera you will need to buy a quality camera bag to protect your investment. The digital à point and shoot camera has preset or automatically adjusted controls for things such as focus, speed, lighting and frame. The lens is attached to the body of the camera and usually includes an LCD screen as the only viewfinder. The à point and shoot camera is quiet (no loud shutter sounds) and provides great flexibility such as rotating viewfinders and small size. While it has been associated with low quality images in the past there have been significant improvements in the higher end models that rival the quality of film and digital SLR. You can find a good quality à point and shoot camera for as little as $100, while the high performance models, such as the Canon PowerShot G7, retails between $499 and $897 (cnet.com). The digital à point and shoot are also generally smaller and sturdier, so they are easily portable and make it effortless to quickly take a snapshot without having to adjust any settings. A digital SLR camera is a better option if you are a serious photographer who needs to have more flexibility and control over how the image is captured à - you will need to understand the different settings and manually adjust them to capture the perfect image (Long). For people who have past experience with traditional 35mm cameras the transition to a SLR will be a natural one as they share many of the same features. While for those that have never used a camera before, the digital à point and shoot is the better option (Dunn). The digital SLR is also larger and requires accessories such as lenses while the à point and shoot camera will allow you to easily capture the moments of your life (birthday parties, sporting events, etc) with the preset controls and small size. Another difference between the two is cost. The à point and shoot can be purchased at a lower price than the digital SLR. .uc1f9e6da26e9e98acda682e0e7f6b2ba , .uc1f9e6da26e9e98acda682e0e7f6b2ba .postImageUrl , .uc1f9e6da26e9e98acda682e0e7f6b2ba .centered-text-area { min-height: 80px; position: relative; } .uc1f9e6da26e9e98acda682e0e7f6b2ba , .uc1f9e6da26e9e98acda682e0e7f6b2ba:hover , .uc1f9e6da26e9e98acda682e0e7f6b2ba:visited , .uc1f9e6da26e9e98acda682e0e7f6b2ba:active { border:0!important; } .uc1f9e6da26e9e98acda682e0e7f6b2ba .clearfix:after { content: ""; display: table; clear: both; } .uc1f9e6da26e9e98acda682e0e7f6b2ba { display: block; transition: background-color 250ms; webkit-transition: background-color 250ms; width: 100%; opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #95A5A6; } .uc1f9e6da26e9e98acda682e0e7f6b2ba:active , .uc1f9e6da26e9e98acda682e0e7f6b2ba:hover { opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #2C3E50; } .uc1f9e6da26e9e98acda682e0e7f6b2ba .centered-text-area { width: 100%; position: relative ; } .uc1f9e6da26e9e98acda682e0e7f6b2ba .ctaText { border-bottom: 0 solid #fff; color: #2980B9; font-size: 16px; font-weight: bold; margin: 0; padding: 0; text-decoration: underline; } .uc1f9e6da26e9e98acda682e0e7f6b2ba .postTitle { color: #FFFFFF; font-size: 16px; font-weight: 600; margin: 0; padding: 0; width: 100%; } .uc1f9e6da26e9e98acda682e0e7f6b2ba .ctaButton { background-color: #7F8C8D!important; color: #2980B9; border: none; border-radius: 3px; box-shadow: none; font-size: 14px; font-weight: bold; line-height: 26px; moz-border-radius: 3px; text-align: center; text-decoration: none; text-shadow: none; width: 80px; min-height: 80px; background: url(https://artscolumbia.org/wp-content/plugins/intelly-related-posts/assets/images/simple-arrow.png)no-repeat; position: absolute; right: 0; top: 0; } .uc1f9e6da26e9e98acda682e0e7f6b2ba:hover .ctaButton { background-color: #34495E!important; } .uc1f9e6da26e9e98acda682e0e7f6b2ba .centered-text { display: table; height: 80px; padding-left : 18px; top: 0; } .uc1f9e6da26e9e98acda682e0e7f6b2ba .uc1f9e6da26e9e98acda682e0e7f6b2ba-content { display: table-cell; margin: 0; padding: 0; padding-right: 108px; position: relative; vertical-align: middle; width: 100%; } .uc1f9e6da26e9e98acda682e0e7f6b2ba:after { content: ""; display: block; clear: both; } READ: Medici Patronage EssayThere are no storage limitations on either camera because they both generally can accommodate external storage, such as a 12GB SD card, that holds thousands of images. Another common feature is that the higher end cameras for both types generally have built-in WiFi, meaning that you can upload your images to your favorite social networking site from anywhere that has a WiFi connection. Both types of cameras will allow you capture an image, so the deciding factor is really what kind of image you want to capture, how easily you want to capture it, and how much you want to drain your bank account to do it.

Satire Essay Main Rules, Topics, Examples

Satire Essay Main Rules, Topics, Examples How To Write A Satire Essay This article will guide you on how to write a satire essay in detail and will explain what a satire essay is as well as show you some examples. The text uses satire to make you understand its main objective. Assignments on this topic are known to be the most challenging for most students. In these kinds of essays, students need to show their expertise in content and subject area. Similarly, they should use humor to point absurdities found in our real-life situations . Although satire essays are full of humor, there are those without or minimal instances of humor. Most of them are expressed in a serious tone which shows that readers should take them seriously. There are advantages of writing these kinds of essays more so to those individuals wishing to master the art of writing. Once you have learned how to infuse irony, humor, and hyperbole, you will discover them not only being fun but also easy to write. Learning your Task Its crucial for you to understand every aspect of your writing assignment. You should be in a position to point out the following: If your homework intends to satirize a given cultural topic The length of the essay Our formatting guide will help you select the right format to use while writing your assignment. You might be in a dilemma not knowing whether to write your paper in first, second or third person point of view. For those who have never read satire essays before, you should consider reading the work of Jonathan Swifts A Modest Proposal who is well known for these types of pieces. If you are wondering where to find them, then consider the site The Onion which usually deals with the topics in politics. While writing your assignment, incorporating satire enables you to write the essay in a first persons point of view. This makes you point out issues in the society especially those concerning society and culture. Using an example where this article points womens demeaning which is being explained by Trumps Hollywood tapes leaked information (Satire Essay, 2019). Meme proposing that female gender should not oppose what amen say suggest that they are annoyed by his utterances. This is clearly shown through the work of E.L. Jamess Fifty Shades of Gray showing a romantic relationship between female and male where the male is in total control and the woman is expected to submit to him. Topics of Satire Essay When writing a satire essay on any topics, its good to point out the significant events of culture and politics. The most common ideas you should consider while writing: Brexit Border Walls Hillary Clinton Mike Pence Donald Trump Barack Obama Tim Kaine Immigration reform A list of satirical topics is endless and if you are unsure of what to select contact our support team who are ready to help you any time. Brainstorming of Any Satirical Essay Any good essay writing process begins with brainstorming. Brainstorming is a useful tool for all essay writers that plays a significant role even in writing a satirical essay (Satire Essay, 2019). While there are familiar writing outlines employed in the initial stages of planning, there are other methods that work perfectly well when it comes to satire writing tasks. One of the tools that are commonly used and we like most is the use of a bubble map. A bubble map is a simple tool that would be used starting from elementary schools onwards. The tool associates words in line with your topic of interest. For instance, if you decide to write a bubble map for any prominent figure in the society say, Donald Trump, you will diversify and use words like businessman, father, married, adulterer, divorced, New York City, orange, billionaire, bombastic, real estate, and home alone. You can see from the above bubble map how those words bring out elements that are associated with Donald Trump. When it comes to descriptive essays on a dog, there would be some words in the middle like the name of that given dog (Satire Essay, 2019). When using the bubble map, you should be aware that the words you choose should not be your own words you decide to use while writing your essay. The words used should aid in exposing an issue and further directs on the ways of approaching it satirically. Thesis Statements in Satire Essays After deciding on the right topic, you should then come up with a good thesis statement for your essay. You may be wondering what a thesis statement is. Thesis Statement is merely a road map of your piece that is always one or two sentences. It helps your readers understand the primary objective of your essay. Regardless of your essay type, the structure of your thesis statement always remains the same except in satire essay where it differs slightly. In satire essays, it is different unlike situations when one is proposing a real idea. Below are some examples of Thesis Statements: To ensure the safety of your jewelry, you need to be conspicuous on it, ensure valuable jewelry is stored in a vault or deposit box that is safe, also, do not travel with excessive jewelry than (Author: Kim Kardashian-West) Having a successful marriage is extremely simple: you have to identify your second wife while married to your first wife and have more children with her before you get married. (Author: Brad Pitt) From the above examples, it is clear that the most satirical element in the essay is the individual writing it. Also, the target audience can be part of the satire. When Jimmy Carter wrote to Trump a letter informing him not to worry of offending women is satirical in a way since both Jimmy and Trump are respected figures in the United States of America.   The case of Bill Clinton is writing a letter to Barrack Obama to guide him on how to be a good husband while in the White House is Irony in itself. This is because Obama is well known for his excellence in family matters and he is perceived to be an excellent husband too. On the other hand, Bill had a lousy legacy as he had an affair outside marriage while in office. Finally, criticisms of Maddona of Lady Gaga of publicity or even Peter Rose Criticizing Tom utilize all aspects of double-satire. Resources for Satirical Essays A wide range of satirical essays is based on events happening in the current century. Though citing them directly may not be compulsory at the moment, it is essential for you to know the real facts and issues that are associated with a given situation (Satire Essay, 2019). It is even ironical for you to identify the satiric news sites. In this modern time, this would be much more difficult to notice concerning political context. To avoid all these troubles, you need to be careful while selecting your topic and ensure your sources are unbiased and academically reliable. It can be difficult finding a reliable source for your essay. To be sure you have the right sources, use the sources that are not more than three years old and from reputable publishers like newspapers, magazines, and .com and .org websites. However, you are free to use sources for more than three years old, but you should inform your readers of any change of information in the concerned period. Additionally, you might have been discouraged to use sources like Wikipedia, Britannica, and Encyclopedia while doing your writing assignments. The advice is good as these sources are not regarded as reliable sources in the scholarly world. However, do not allow the ban to prevent you from using the references (Satire Essay, 2019). They can give an excellent overview of your topic and give you resources you can research for further information.   Google scholar is another great search engine that gives you an opportunity to limit the kind of resources you want to look at. With the above search engine, you can find either academic or scholarly articles and would support you in finding the best academic and scholarly writing. Other generic sites like CNN, Fox News, and MSNBC are also good sources of information while writing satire essays. Also, you can make use of other local and major networks as they are good sources of news. The above news channels have programs that are not sources but are both social and political commentary. While using these shows, you need to be careful as they sometimes present information to the readers in a biased way or give unreliable information. As you write be aware of possible biased information especially when selecting your sources. Citing your Sources If you decide to incorporate all your resources in your satirical essay, you will have to cite all academic sources to back-up any claim you make on certain political styles. If your essay is based on actual dates, rare facts, and figures, you need to cite all your sources. In such cases, you will be directed on the formats to use, or you will have to decide on your own . The most commonly used academic citation styles for undergraduate students are the American Psychology Association (APA), modern language association (MLA), and Turabian or Chicago. Unless in your assignment there are clear instructions on the type of format to use, go for the writing style you understand best. Examples of Satire Essays As a student, its easy for you to digest a concept if you are given an example. Thus, our model will not only help you understand how you can write an amazing satirical essay but will also help you master how you can format your essays correctly. On our site, you will get an excellent satirical essay. Just fill in the order form. We hope that after reading our article on satire and using our provided examples, you will be more confident than before to confront any satire essay throughout your academic journey. Even after reading our article and examples you might still encounter challenges right from topic selection to completing your essay . Remember we are here for you. We have a complete team of tutors ready to help you in any challenge you encounter in your writing process from topic selection to writing a flawless piece. To get more insight, go to our website.

Properties of PVC/ABS blends

Properties of PVC/ABS blends Introduction Polymer blending is one of the fastest growing areas of polymer technology. Blending of polymer has become an increasingly important technique because it is an economical, viable and versatile way in which new material can be produced with a wide range of properties by merely using conventional processing equipment such as extruder or internal mixer. Polyvinyl chloride is most versatile material in plastic family and second largest consumption material in plastic industries compared to polyolefin’s. It is characterized by rigidity, hardness, excellent tensile modulus and low cost. However, it has low impact strength and poor thermal stability. Which limit’s it’s used. Similarly, Acrylonitrile-Butadiene-Styrene (ABS) is one of most largely used engineering plastics. It has excellent mechanical, thermal, electrical & chemical properties. Followed by inferior properties such as poor weather resistance, highly flammable and merely high cost. Polyvinyl c hloride is largely blended with number of polymers and rubbers. In most cases, to improve properties of PVC and rarely to improve properties of other materials. One of most inferior properties of PVC is low impact strength. To overcome this problem, it is blended with many rubbery materials. It has been shown that impact strength of PVC increases by blending with rubbery material such as NBR, SBR etc. But, it follows the decrease in tensile strength, rigidity and in most cases thermal stability. Hence to achieve high impact strength, better thermal properties along with rigidity, PVC is blended with ABS. The blend of PVC and ABS posses their advantage of impact strength, rigidity, chemical resistance, electrical properties and overall low cost. In ABS, generally the rubbery phase is made of emulsion polymerized polybutadiene, which constitutes the main polymer chain. The glassy phase is made of styrene and acrylonitrile grafted on Polybutadiene. Thus, it combines the impact strength of rubber and tensile strength, heat stability of styrene Acrylonitrile (SAN) Matrix. Thus properties of styrene acrylonitrile (SAN) and polybutadiene are imparted in PVC/ABS blend. Compatibility of Polyblend of PVC/ABS blends Compatibility is characteristics, which shows that components of blends are soluble in one another in all proportion. However, compatible blends are susceptible to phase separation at elevated temperature. While preparing blend, it is necessary to consider compatibility of components of blend with each other, which are used to prepare blends. In case of PVC/ABS blend, PVC and ABS are used as blend components. ABS is made by emulsion polymerization of SAN grafted by Polybutadiene. Polystyrene and Polybutadiene, have solubility parameter close to PVC. Although, solubility parameter of PS and Polybutadiene are close to PVC, they do not have good compatibility because of their being non-polar nature. While Acrylonitrile imparts good compatibility because of itâ⠂¬â„¢s polar nature (as shown in table). Solubility parameter of components of PVC/ABS blend    Yodouchi and Seto reported that in ABS material, the brittle and glassy component ( PS and SAN) improves tensile strength while Polybutadine contribute to toughness. The mechanical properties have been shown to be affected by type of ABS used, due to different Polybutadiene content.

Global Operations managenment Essay Example | Topics and Well Written Essays - 250 words

Global Operations managenment - Essay Example In order to address this issue, PPQ Parts should uphold a decent relationship with every stakeholder of the country and do not engage into any activity which cause impairment to the reputation and goodwill of PPQ Parts. 1. The foremost economic issue for PPQ Parts would of exchange rate fluctuations. These adverse movements in foreign exchange rate can harm the company’s profits. So in order to mitigate this risk, PPQ Parts should implement a reasonable hedging strategy to combat this foreign exchange currency risk. 2. Another economic issue that the company might have to face is the level of inflation in the foreign country. Due to inflation, the cost of goods sold of PPQ Parts may increase resulting in lower profits. So in order to avoid this situation, PPQ Parts should estimate the reasonable demand of the PPQ Parts’ products and contract with the suppliers to fix the rates of materials for future

Introduction to case study research Essay Example | Topics and Well Written Essays - 1750 words - 1

Introduction to case study research - Essay Example In this regard, the research may involve exploring the reasons for existence of such issues in certain places. In addition, the research may involve description of certain environmental aspects, business aspects as well as economic aspects of the environments where such a research is conducted (Green, 57). The results to those researches are well documented in the case studies. In this regard, the case studies will therefore act as the best secondary sources to use when one intends to carry out a research concerning specific aspects. This will be made easier if such a research topic had already been covered in one of the case studies that had been conducted with reference to such topic in question, or anything in close relationship to the topic that is to be researched on. In relation to the above case, the case study researches would be critical in the sense that they will act as references (Saunders, 27). In this manner, they will give additional information relevant to the research in question. In this perspective, it is of crucial significance to understand the meaning of a case study as well as a case study research. It is of critical significance to note that the term case study may have very many meanings. However, the difference in those meanings is not quite large. Every meaning tied to the term case study always has several similarities with each other. However, there are slight differences in such meanings with regards to what is being referred to (Thomas, 41). These meanings may vary with regards to the topic being researched on. Again, the difference in meanings of the term â€Å"case study† may be evident in reference to the specific environment where the case study research is conducted. On the same note, it is of critical significance to note that the difference in meanings of the term case studies may depend upon the different views of different individual personalities. This may be in relation to

Continuity and Change in Chinese Nationalist Ideology World War I to Present Essay Example for Free

Continuity and Change in Chinese Nationalist Ideology World War I to Present Essay Since the beginning of the First World War to the present, nationalist ideology within China has caused change and continuity in several aspects of this nation’s society. One major change in China from the First World War to the present is its foreign relations with other countries due to factors such as communism and neocolonialism. Although China has changed in this way, it has remained one united nation despite foreign invasion and other internal/external conflicts. In the early 1900s, China was a state of continual civic and revolutionary unrest. As support for revolutionary efforts began to spread, China shifted from a monarchy to a republic. However, this rule didn’t last long as warlords within the nation began establishing themselves as regional or provincial rulers. This helped lead to the deterioration of Chinese society. Another factor leading away from a centralized state was fragmented relations with foreign powers. Since the 1900s, a network of foreign control over the Chinese economy had been established by the unequal treaties, which effectively prevented economic development within China. These treaties and other concessions permitted foreigners to intervene in Chinese society and not control the state, but impair its sovereignty. After the First World War, nationalism began to develop rapidly in China. China eagerly looked to the U. S. government to support the elimination of the treaty systems and the full restoration of Chinese sovereignty. However, when the U. S. approved increasing Japanese interference in China, this sparked the May Fourth Movement. Chinese people protested Japanese interference and began to re-establish national unity. As China began shifting from a divided sphere of influence to a dominant world power, it also became more influenced by communism. During the Second World War, the majority of concern to combat communism was in the Soviet Union. While this was taking place we, the U. S. , neglected to aid the efforts of Jiang Jieshi, who sought to unify the nation of China and bring the conflicts of nationalism and communism to an end. In his place, Jiang Jieshi leaves behind a void of power. Communist leader, Mao Zedong stepped up to fill this void. He like many other rulers in China used the Mandate of Heaven to justify his rise to power and take control of China. In 1949, Mao started the Red Revolution, a revolutionary effort to spread communism in China. Communism soon overpowered the nationalist party as the main ruling party. Mao also aimed to make China a self-reliant, isolated nation. However in doing so, China could not economically support itself or its communist views. In the 1970s the People’s Republic of China began large, radical economic reforms forcing the country to become one of the most capitalistic nations in the world. China quickly added itself to the global economy by opening its borders to the trade of various nations. China soon became the economic power that it is today and despite all the turmoil that has occurred from the First World War to the present, China has remained one united nation. From the past to the present, the ideology behind Chinese nationalism has been in a constant state of change. The shift in government and foreign relations throughout the world has been a major source of China’s nationalism. Although these foreign relations are constantly changing, China has remained a unified nation.

Natural is Relative Essay -- Invention Writing Technology Papers

Natural is Relative In his essay "From Pencils to Pixels," professor and author Dennis Baron wrote, "We have a way of getting so used to writing technologies that we come to think of them as natural rather than technological. We assume that pencils are a natural way to write because they are old†¦" (51). When assigned to develop my own writing technology, however, I discovered that this common human conception is wrong. Dead wrong. And the word "natural" - as we use it today - is relative. My mission was to forego modern writing tools (pencils, pens, paper, chalk, etc.) and write 20 words or less with natural materials of my choosing. The word "natural" was debatable, however. Produce, for example, is considered natural, but to use an apple that has been picked, cleaned, packaged and then sold at a supermarket is arguably less natural than using an apple straight from a tree. I wanted to aim high and avoid the quasi-natural, so I settled for pine needles. They were abundant at my parents' house and easy to break apart in order to form letters, I reasoned. Due to an excess of winter weather, I would have no choice but to spell out my text in the snow. Winter was in full swing during the afternoon I trekked outside to complete the assignment. I could not manage to do more than 30 seconds of "writing" without a huge icy gust of wind passing through and taking my project with it. I needed something a bit heavier, and I decided to use small sticks. Just the process of gathering twigs was a somewhat tedious one. Each stick had to be thin and relatively knob-free so I could break it easily, but if it was too thin, it risked being blown away. I was developing my technology and attempting to craft it to perfection - or at... ...t primitive form. We created it. That being said, quite frankly, "There is no way to write 'naturally'" (Ong 322). Works Cited Baron, Dennis. "From Pencils to Pixels." Writing Material: Readings from Plato to the Digital Age. Ed. Evelyn B. Tribble, Anne Trubek. Addison Wesley Longman, Inc., 2003. 35-53. Baron, Naomi. "The Art and Science of Handwriting." Writing Material: Readings from Plato to the Digital Age. Ed. Evelyn B. Tribble, Anne Trubek. Addison Wesley Longman, Inc., 2003. 54-60. Ong, Walter. "Writing is a Technology that Restructures Thought." Writing Material: Readings from Plato to the Digital Age. Ed. Evelyn B. Tribble, Anne Trubek. Addison Wesley Longman, Inc., 2003. 315-335. Plato. "From Phaedrus." Writing Material: Readings from Plato to the Digital Age. Ed. Evelyn B. Tribble, Anne Trubek. Addison Wesley Longman, Inc., 2003. 360-363.

What Weapons and Transportation Machines Were Improved the Most Between World War One and World War Two?

What Weapons and Transportation Machines were Improved the Most between World War One and World War Two? During World War One, tanks, guns, chemical weapons, bombs, airplanes, ships, submarines and grenades were used to kill. A lot of these weapons and machines were difficult to use, really easy to destroy, too heavy, didn't last too long, not accurate enough, and didn't shoot too far. The weapons and Transportation machines were improved in World War Two to make it easier to kill; therefore soldiers would kill more of the enemies. Also, if the machines were too easy to destroy, they improved them or eliminated them. New technologies were invented after World War One because the soldiers realized that they needed better strategies to kill the enemies without themselves getting injured and killed. Some of those technologies were used for defensive purposes as well. For example, the radar was a new technology that was used to identify where the enemies are so they could kill them, and the radar was used to identify when the enemies were attacking so that they could defend ahead of time. Transportation machines such as airplanes, tanks, submarines, ships, and weapons such as different types of guns were improved in World War Two. Airplanes, tanks, submarines, and ships used in World War One were improved for World War Two. Airplanes in World War One didn’t have as much technology as in World War Two and couldn’t fly a long distance in a short amount of time like the planes from World War Two used to fly. Airplanes in World War Two had more space for bombs on board and they had radars. Tanks in World War Two had more weight than in World War One, meaning that they had more metal on them so bullets wouldn’t damage the tanks easily. In World War One war most tanks would have a range of 25 miles[1], while in World War Two a tank could reach the range of 400km[2], which is 248. 5 miles. The armor inside the tank also increased, that’s why the tanks got heavier in World War Two. Submarines had more deck guns in World War Two because more guns were invented during World War Two[3]. The Radar was invented after World War One and before World War Two; therefore they installed the radar in the submarines for World War Two. The Submarines in World War Two had air conditioning and new battery-powered engines, which was not used in World War One either[4]. The ships in World War One didn’t have radars because the radar was invented after World War One. Ships in World War Two had the radars installed, got their speed increased, and the cannon range increased as well. The usage of machine guns in World War One brought new ideas to built better models of machine guns and submachine guns in World War Two. MP40 is a submachine gun that was produced from 1940 to 1945. The MP40 is an automatic gun, and it’s really accurate. Its effective range is 100 meters, and its rate of fire is 550 rounds per minute. 5] Another model of a commonly used submachine gun is the Thompson. This submachine gun was produced in 1921. The Thompson is an automatic gun as well. It is very accurate, and the fire rate is very high: 800-850 rounds per minute. Its effective range is 50 meters. [6] A very commonly used and successful machine gun is the SG-43, which was in service from 1943-1968. This machine gun was gas operated, and it wa s automatic. The machine guns in World War One were not gas operated and didn’t have the rate of fire that the machine guns from World War Two have. The rate of fire from the SG-43, which was used in World War Two, is 500-700 rounds per minute,[7] while a machine gun from World War One would only fire 400-600 small-calibre rounds per minute. [8] The performance of the rifles in World War One was really poor; therefore they improved some rifles and even made new models for World War Two. Rifles in World War One would usually fire only 15 rounds per minute. Their range was about 1,400 meters, but the accuracy could only be guaranteed at around 600 meters. [9] Before World War Two, the performance of the rifles was improved and new Rifles were created. The STG-44 was a gas-operated assault rifle that was developed during World War Two in 1942. Its effective range is 300 meters, but its fire rate was 500-600 rounds per minute. [10] The Karabiner 98k is a bolt-action rifle that was produced from 1935-1945. Its effective range with iron sights is 500 meters, and over 800 meters with optics. [11] The M1 Garand is a gas-operated semi-automatic rifle that was produced from 1936-1957. Its effective range was 402 meters. [12] All weapons and transportation machines such as airplanes, tanks, submarines, nd ships that were used in World War One had a poor performance; therefore they were improved before and during World War Two. Works Cited Day, V. , 14, A. , 1945. , produced, o. f. , & Army, m. t. (n. d. ). Rifle, Cal. .30 06, M1, Garand. GlobalSecurity. org – Reliable Security Information. Retrieved February 16, 2010, from: http://www. globalsecurity. org/military/systems/ground/m1garand. htm (February 6, 2010). StG 44. Retrieved Fe bruary 16, 2010 from Wikipedia website: http://en. wikipedia. org/wiki/Stg_44 (February 16, 2010). Karabiner 98k. Retrieved February 16, 2010 from Wikipedia website: http://en. ikipedia. org/wiki/Kar98 (February 16, 2010) M1 Garand. Retrieved February 16, 2010 from Wikipedia website: http://en. wikipedia. org/wiki/M1_garand (February 16, 2010). MP 40. Retrieved February 16, 2010 from Wikipedia website: http://en. wikipedia. org/wiki/MP40 (February 14, 2010). Thompson submachine gun. Retrieved February 16, 2010 from Wikipedia website: http://en. wikipedia. org/wiki/Thompson_submachine_gun First World War. com – Weapons of War: Rifles. (n. d. ). First World War. com – A Multimedia History of World War One. Retrieved March 3, 2010, from:  http://www. firstworldwar. om/weaponry/rifles. htm guns, 1. h. (n. d. ). First World War. com – Weapons of War: Machine Guns. First World War. com – A Multimedia History of World War One. Retrieved March 2, 2010, from: ht tp://www. firstworldwar. com/weaponry/machineguns. htm I, t. e. (n. d. ). World War One, The Submarine. World History International: World History Essays From Prehistory To The Present. Retrieved February 16, 2010, from: http://history-world. org/world_war_i_and_the_submarine. htm (January 4, 2010). SG-43 Goryunov. Retrieved February 16, 2010 from Wikipedia website: http://en. ikipedia. org/wiki/SG-43 Rusty coot. (2010) What is the difference between World War 1 submarines and World War 2 submarines?. Retrieved February 16, 2010 from WikiAnswers website: http://wiki. answers. com/Q/What_is_the_difference_between_World_War_1_sub marines_and_World_War_2_submarines St. Christopher House & The Working Group Inc. (2004). World War II Tanks. Retrieved February 16, 2010, from The Valour and the Horror website: http://www. valourandhorror. com/DB/SPEC/WW2tanks. php (Thursday, February 13, 2003). WW1 Tanks & Cars. Retrieved February 16, 2010, from Mailer. fsu. edu website: ttp://mailer. fsu. edu/~akirk/tanks/ww1/WW1. html ———————– [1] Katya Kuersteiner, Witold J. Lawrynowicz, John Stevens, Auke Smit, John Wilson, (February 13, 2003). â€Å"WWI Tanks & Cars†. Retrieved February 16, 2010, from Mailer. fsu. edu website: http://mailer. fsu. edu/~akirk/tanks/ww1/WW1. html [2] (2004). â€Å"World War II Tanks†. Retrieved February 16, 2010, from The Valour and the Horror website: http://www. valourandhorror. com/DB/SPEC/WW2tanks. php [3] â€Å"World War One, The Submarine†. Retrieved February 16, 2010, from: http://history-world. org/world_war_i_and_the_submarine. htm [4] (2010). What is the difference between World War 1 submarines and World War 2 submarines? † Retrieved February 16, 2010 from WikiAnswers website: http://wiki. answers. com/Q/What_is_the_difference_between_World_War_1_submarines_and_Wo rld_War_2_submarines [5] (February 16, 2010) â€Å"MP40†. Retrieved February 16, 2010 from Wikipedia website: http://en. wikipedia. org/wiki/MP40 [6] (February 14, 2010). â€Å"Thompson submachine gun†. Retrieved February 16, 2010 from Wikipedia website: http://en. wikipedia. org/wiki/Thompson_submachine_gun [7] (January 4, 2010). â€Å"SG-43 Goryunov†. Retrieved February 16, 2010 from Wikipedia website: http://en. ikipedia. org/wiki/SG-43 [8] Michael Duffy, (22 August, 2009). â€Å"Weapons of War – Machine Guns†. Retrieved March 2, 2010, from: http://www. firstworldwar. com/weaponry/machineguns. htm [9] Michael Duffy, (22 August, 2009). â€Å"Weapons of War – Rifles† Retrieved March 2, 2010, from: http://www. firstworldwar. com/weaponry/rifles. htm [10] (February 6, 2010). â€Å"StG 44†. Retrieved February 16, 2010 from Wikipedia website: http://en. wikipedia. org/wiki/Stg_44 [11] (February 16, 2010). â€Å"Karabiner 98k†. Retrieved February 16, 2010 from Wikipedia website: http://en. wikipedia. org/wiki/Kar98

Liebeck v. McDonalds 1994

The case of Liebeck vs. McDonald’s, also known as the McDonald’s case is one of the most controversial tort cases, which according to many did not end with victory either on the part of the plaintiff or of the strong defense, but rather on the time’s growing debates on tort laws and how courts deal and resolve tort cases.   It may sound ridiculous but this case started with a simple cup of coffee.   This is not an ordinary case wherein one could easily which party has been negligent.   In fact, it can be said that both parties have been negligent and have their own faults of the incident that gave rise to the dispute.   In important to order to understand the case better, it is important to know the facts of the case and how the court decided. The Facts: This case was filed by Stella Liebeck of New Mexico, who, in February 1992, while in the passenger seat of her grandson’s car, was severely burned by McDonalds’ (The Actual facts About the McDonald’s Coffee Case, n.d.) coffee after it spilled on her legs, groin and buttocks causing third-degree burns (Bracken, 2005).   From an ordinary perspective, one can view this as an ordinary scenario in restaurants and coffee shops and among coffee drinkers, especially those who consume their coffee in moving vehicles. But this is not the case in the McDonald’s case. The case was anchored on the claim that McDonald’s have been negligent and that their coffee has been extremely hot beyond the normal temperatures of coffee served in other coffee shops and restaurants.   According to the article, The Actual Facts About the McDonalds’ Coffee Case, â€Å"McDonalds’ coffee was not only hot, it was scalding—capable of almost instantaneous destruction of skin, flesh and muscle†. Ms. Liebeck, was at that time 79 years old and ordered coffee from the local McDonald’s which in turn served the hot coffee in a Styrofoam cup at the drive-through window.   After receiving the order, his grandson allegedly pulled his car forward to give way to other customers and again stopped to allow Ms. Liebeck to add creamer and sugar to her coffee.   In order to do this, she held the cup with her legs so that she may be able to open the lid and add in the creamer and sugar.   However, as she removed the lid, the hot content poured to her lap causing the complained damages. This is as opposed to the claim that the car was in motion and the Liebeck was driving the car when the incident happened (The Actual Facts About the McDonald’s case, n.d.).   With this incident, it can be seen that at one point, the Liebeck’s can be said to have been contributors to the accident as what McDonald’s have claimed that Liebeck was the proximate cause of the injuries she sustained.  Ã‚   McDonald’s claimed that it was Liebeck who has been negligent and not them because as customers, they should have known that coffee is hot and they should be extra cautious in handling coffee especially while in a vehicle whether it be in motion or in full stop. According to the vascular surgeon, Ms. Liebeck suffered full thickness burns at about six percent of her body.   She stayed in the hospital for eight days and underwent skin grafting, debridement treatments.   She now comes to the court for the settlement of her claim for $20,000 to cover her m edical expenses as a result of the incident.   However, McDonald’s refused to pay. In its argument, McDonald’s argued that consumers know coffee is hot and that its customers want it that way.   They however admitted that its customers were unaware that they could suffer third-degree burns from the coffee and that a statement on the side of the cup was not a warning but a reminder since the location of the writing would not warn customers of the hazard (The Actual Facts About the McDonald’s Case, n.d.). The Issue The issue in this case is whether or not McDonald’s has been negligent causing the accident complained off making it liable to pay the medical expenses. Held: The decision of the court is anchored mainly on tort laws and decided by determining who has been negligent in the incident that caused the harm being complained about.   After trial, the jury ruled in favor of Liebeck awarding her a total of $200,000 in compensatory damages, which however was alter reduced to only $160,000 after a finding of the jury that McDonald’s was not solely responsible for the accident but instead, Liebeck was also 20 percent at fault for the coffee spill (The Actual Facts About the McDonald’s Case, n.d.). In addition, the jury also awarded some $2.7 million as punitive damages, an amount equal to McDonald’s total sales for two days.   However, the court again lower this punitive award of damages to $480,000 although the judge found McDonald’s to be â€Å"reckless, callous, and willful†Ã‚   (The Actual Facts About the McDonald’s Case, n.d.). According to Bracken (2005), this ruling of the jury is based upon the determination from the documents presented that Liebeck’s medical bills totaled to about $10,000 due to the injuries she suffered.   Bracken (2005) also explained that this case â€Å"is an example of why tort cases should not be merely decided on the simple facts†.   Nevertheless, despite the public nature of the case and the loud news that the incident has made, the public really don’t know how the case really ended as the parties came into a secret settlement whose nature and stipulations have never been revealed to the public at all (The Actual Facts About the McDonald’s Case, n.d.). As it is provided by Bracken (2005), the McDonald’s case illustrates the implication that cases should not be decided on based solely on the face value of the case because at first instance, it can be easily said that McDonald’s was negligent.   However, reviewing the facts of the case and based on human experience, Liebeck has also been negligent enough that the injuries she suffered cannot be blamed on one party alone.   Her own actions and decisions may have also contributed to the happening of the accident. She has been negligent in handling the cup of coffee, which a normal person would always believed to be hot and can cause injury even without actually knowing its actual temperature.   This is the reason why I think the jury made a mistake in the case because I consider the incident as purely an accident, which may have only been aggravated by Liebeck’s negligent handling of the hot coffee.   A normal person would always take extra precaution in handling potentially harmful objects.   I consider McDonald’s serving of the hot coffee to be totally acceptable in its aim to provide the best coffee for its customers. The case of McDonald’s should have been judged after an in-depth investigation to determine McDonald’s alleged negligence for three main reasons (Bracken, 2005).   First, according to Bracken (2005), â€Å"this is not the first lawsuit regarding the temperature of McDonald’s coffee illustrating continual negligence by McDonald’s†.   Perhaps one of the strongest arguments against McDonald’s is the fact that there have been previous complaints and similar incidents that may somehow pertain to its negligence in handling its products and in serving them to customers. Past experiences should have been enough to encourage the company to do something with their hot coffee in order to avoid future similar incidents.   But, this did not happen; McDonald’s seems to have neglected its responsibility to its customers over and above their responsibility to provide the best coffee in town; which is to provide them with safe products as well. Secondly, â€Å"the testimony indicated that McDonald’s coffee is served at between 180 and 190 degrees† (Bracken, 2005).   According to McDonald’s, this temperature is based upon a recommendation that coffee should be served on the above mentioned temperature in order to achieve the best taste that customers crave about (Bracken, 2005).   On this aspect, there can be not much question but only on issues why McDonald’s seems to have neglected the fact that they knowingly know that the extreme temperature of their coffee can cause serious injuries.   They should have at least used more secure packaging than Styrofoam cups. Thirdly, Bracken (2005) also noted how the articles presented failed to indicate that â€Å"McDonald’s attempted to warn consumers of its extreme nature since the company served coffee above the temperature a reasonable nature since the company served coffee above the temperature a reasonable person would expect to receive or consume coffee† (Bracken, 2005). Admittedly, McDonald’s have been negligent on this aspect.   In sum however, after considering all premises, I still believe that the jury erred in ruling in favor of Liebeck and the awards for damages to be excessive. This case could in fact serve as a precedent for all other future cases wherein complainants may come to court of similar complaints only to extort sum of money from companies like McDonald’s.   Clearly, it can be said that McDonald’s has not been solely accountable and negligent in the case.   Liebeck was also negligent.   Hence, it could have been enough thet the court awarded her sum of money to cover all her medical expenses and small amount in compensatory and punitive damages for the injuries she sustained.   This could have been one way to educate the consumers that they also have the corresponding responsibility to themselves and not to fully pass it on to providers like McDonald’s. As a restaurant owner, perhaps one of the waking realization that this case brought is the fact that because tort cases are almost always linked to negligent acts, it is important to be very careful in all aspects of safety in the overall operations of the business.   One very obvious mistake on the part of McDonald’s is their failure to give sufficient warning to the customers of the extreme temperature that may cause damage to them.   Incidents like the McDonald’s case could have been avoided if customers have been warned, the least on cup labels or by the restaurant staff that extreme temperature could be harmful. It is sad to note that although many businesses have genuine intentions to satisfy and to protect their customers; negligent acts, probably by reason of lack of knowledge or foresight seem to cause more controversial issues that lead to the numerous cases decided and being heard in court dockets. References Bracken, K.   (2005).   Liebeck v. McDonald’s. Retrieved February 17, 2008, from https://listserv.du.edu/pipermail/torts-russell/2005-August/000010.html The Actual Facts About the McDonalds’ Coffee Case.   (n.d.).   Retrieved February 17, 2008, from http://www.lectlaw.com/files/cur78.htm      

Eco-Friendly Drain Cleaners

Eco-Friendly Drain Cleaners The active ingredient in Drano and other conventional drain cleaners is sodium hydroxide, otherwise known as caustic soda or lye. It is a man-made chemical used for its corrosive properties. According to the federal Agency for Toxic Substances and Disease Registry, the substance is not considered a pollutant per se, as it separates into relatively harmless component elements once released into water or moist soil. But sodium hydroxide is an irritant that can burn skin and aggravate nose, throat and respiratory airways, so contact with it is best avoided. If ingested outright it will likely induce vomiting, as well as cause chest or abdominal pain and make swallowing difficult - so keep it well out of the reach of children. For those who would rather avoid such chemicals entirely, safer alternatives do exist. A plunger or mechanical drain snake - along with a little elbow grease - can often free up clogs as well or better than sodium hydroxide compounds. One home remedy with a proven track record is to pour a handful of baking soda mixed with a half cup of vinegar down the drain  and follow it quickly with boiling water. Another option is to choose any number of enzymatic biological drain cleaners on the market today, such as Earth Friendly Products’ Enzyme Drain Cleaner or Bi-O-Kleen’s BacOut. These make use of a natural bacterial and enzyme mixture to open and keep drains clear. And unlike sodium hydroxide, they are non-caustic and will not facilitate combustion. As any plumber will tell you, a good maintenance regimen is the best way to prevent clogged drains. Flushing drains weekly with boiling water can help keep them clear. Also, installing small screens atop drains will help keep hair, lint and other clogging elements out of the pipeline in the first place.

Intercultural Communication As A Trading of Cultural Stereotypes Essay

Intercultural Communication As A Trading of Cultural Stereotypes - Essay Example The mass media is especially responsible for repeatedly promoting negative and distorted images of different cultural groups until those images and stereotypes often become very difficult to overcome. A few isolated incidents of bad conduct from members of a group, and the entire group is often perceived as being the same, that is because when people stereotype, they don’t feel a need to consider the individuals that make up a group after placing that group in a determined category. Stereotyping serves the purpose of allowing people in one group to claim superior characteristics to those in another group. By attributing characteristics that bear a negative connotation, stereotyping becomes a way that people gain a sense of control about the unknown. This phenomenon not only exists between ethnic cultural groups, but among others as well, such as gender groups, economic groups, educational groups, and generational groups. This is particularly true when one considers the response a younger culture often receives from an older one. There are differences of opinion when it comes to language and culture. Some say that language defines a culture because it affects and molds what we believe and what we think, yet others say that language is only reflective of what goes on inside of a culture. When we talk about people, our intent is to make a specific point, and that point dictates the language and word choices that we make. If we want to portray someone in a positive light, we might refer to them as beautiful, trustworthy, enterprising or as a pillar of society. We would show respect by referring to them as Sir, Miss or Ma’am. On the other hand, if we want to portray someone in a less favorable light, we might call them by their last name only, use words such as shady or dubious.

Epidemiology or pathogenecity of mybacterium tubrtculosis PowerPoint Presentation

Epidemiology or pathogenecity of mybacterium tubrtculosis - PowerPoint Presentation Example In Robert’s opinion, the major contributors to the resurging epidemic of disease are Drug resistance, HIV and Poverty. Richard has also included some other factors that are contributing towards the increasing incidence of disease like lack of political will, poor infrastructure, and weak organization of health services and increasing incidence in prisons. In Roberts opinion, person’s at high risk include people who have had recent contact with an infected person or persons who are immunocompromised due to any reason. Richard’s assertion is that out of those who are exposed, only 30% develop the disease. In his opinion, severity of disease and duration of exposure to the infected person are also the variables that determine the chances of infection. HIV as a cause of resurgence of the incidence of tuberculosis has been agreed upon by both authors. Robert’s understanding is that MDR disease is more prevalent among cases of relapsed disease or defaulters. Richard has agreed to this notion and includes the immunocompromised patients to this group of disease in addition to those included by Roberts. Serafino-Wani,  R.  L. (2012). Tuberculosis 1. Epidemiology of mycobacterium tuberculosis.South Sudan Medical Journal. Retrieved from